Resource Library

MDGo

Statistics on fatal vehicle accidents show that victims most often do not die during or right after a crash, but in the hours and days afterwards, with research indicating that up to 44 percent of people who died in car crashes could possibly have been saved if first responders and hospitals had
re

Customer Stories

Case Study: Reliability-Based Stochastic Mobility Maps

This case study shows how RAMDO software, when used in conjunction with computer simulations, provides improved mobility mapping.

For efficient mission planning of troop movement, the Department of Defense needs reliable mobility maps. These maps are important for decision makers to plan routes

Customer Stories

Case Study: A Smarter Approach to Vehicle Design with System-Level Modeling

By taking a system-level modeling approach, CEVT engineer Michael Palander is creating a powerful testing and simulation platform that can be used to verify the functionality of their new automotive technologies at earlier stages in the design pro...

Customer Stories

Explicit Dynamic Simulation of Tool Drop on the Outer Wing of the Swift020 Unmanned Aerial System using RADIOSS®

The successful launch of a new platform UAS is a comprehensive design engineering and manufacturing endeavor. The full lifecycle must consider maintenance and replacement components. As these requirements often require the use of tools (i.e. screw...

Customer Stories

Characterizing the Murchison Widefield Array Beam Pattern

A precursor to the SKA, the Murchison Widefield Array (MWA) radio telescope was constructed in the Murchison Radio-astronomy Observatory in Western Australia. In order to correctly calibrate and image the data collected by the radio telescope, it ...

Customer Stories

ICAT Achieves Robust Structural Integrity of their Automotive Components using Altair HyperWorks®

The International Centre for Automotive Technology (ICAT) is an automotive testing and R&D centre. In their pursuit to carve a niche as a one-stop solution for the automotive industry’s needs in the areas of product design, testing and validation,...

Customer Stories

Ryerson's International Hyperloop Team

Ryerson's International Hyperloop Team utilized finite element analysis and topology optimization to redesign a metal additive manufactured motor bracket. PolyNURBS was used to make the design 3D print-friendly.

Customer Stories

Daimler

Integrating antennas in windscreens has become popular due to the enhanced aesthetics and the increased antenna surface area that enables improved reception. However, the design of such antennas is a complex procedure. Antenna systems contain diff...

Customer Stories

Faraone

Faraone accelerates the design approach for lighter and stiffer architectural components with premium topology optimization technology.

Customer Stories

Case Study: Ensuring Success of Marine Operations in Tidal Energy

Installation analysis of OpenHydro turbine using ProteusDS.

Customer Stories

Adam Wais of Rolo Bikes Discusses the Working Relationship with Altair

During the development of a new carbon fiber bicycle, the design team at Sweden based Rolo Bikes, wanted to develop a frame which exhibited world leading strength and stiffness attributes while keeping weight to an absolute minimum. The team requi...

Customer Stories, Video Testimonials, Videos

Politecnico di Milano University

The Politecnico di Milano University implemented generative design software to quickly and easily identify the ideal shapes and materials for three architectural design concepts.

Customer Stories

Robot Bike Co.

Developing a Fully Customizable, Additively Manufactured Mountain Bike

Customer Stories

Bremar Automotion uses Altair RADIOSS to Design & Certify FIA Motorsport Roll Cages

“The Altair product is it for us in terms of simulation. That’s all we use. It’s great to be able to show such good correlation between the simulations and physical testing, and to have confidence in not only our approach, but also the Altair prod...

Customer Stories

Re-Loc

Re-Loc is a UK based company that developed a new product to help to accelerate the process of positioning metal reinforcement bars inside concrete bricks. The Re-Loc product is a clip that fits tightly inside the brick’s cavity and attaches to th...

Customer Stories

Lockheed Martin Improves Security Capabilities and Reduces HPC Costs with PBS Professional

Lockheed Martin worked with Altair to deploy a cross-domain security version of PBS Professional for Red Hat Enterprise Linux which enables the use of a single system by users at multiple security levels. The solution resulted in tens of millions ...

Customer Stories

Fully automated in a single process: Optimization and manufacturing of CFRP components

Use of HyperWorks and adapted threestep optimization process for Composite materials integrated in the production process

Benefits:process suitable for large volume seriesflexibility in productionshort learning curve for userslight and yet stiff components
/li

Customer Stories

Increasing Robustness and Reliability of a Race Car Engine with AcuSolve

This study is part of Prodrive’s implementation of AcuSolve to enhance its CFD capability after many years of outsourcing these simulations.

Customer Stories

Sundog

Sundog Eyewear accelerates design times through the use of conceptual design softwarewhile improving visualization of the final product using integrated rendering.

Customer Stories

Northwestern University Success Story

Using HyperWorks for Teaching Computational Optimization Methods in Engineering Design at Northwestern University

Customer Stories

LG Electronics Success Story

LG Electronics Performs Smartphone Drop-Test Simulation in Less than 24 Hours with New Automated Approach

Customer Stories

HyperWorks Optimization Capabilities Integrated into Packaging Design Process Help Unilever Cut Costs and Development Time

Unilever reduced the time required for
simulation and significantly lowered costs
by working with Altair HyperWorks suite
of computer-aided engineering tools.

Customer Stories

Polaris Reduces Weight of Snowmobile Structures Up to 40% with solidThinking Inspire and OptiStruct

Polaris, based in Roseau, Minn., is a
renowned manufacturer of snowmobiles,
and its Snowmobile Chassis Structures
Group is engaged in design and testing that supports three different platform teams with chassis solutions for each set of requirements. Computer-based design and finite element (FE)

Customer Stories

Clemson University Chooses PBS Professional for HPC Workload Management

Clemson University's IT department, Clemson Computing and Information Technology (CCIT), selected PBS Professional over open-source alternatives for mission-critical workload management. "We were looking to fulfill two requirements that our open s...

Customer Stories

Dana Adopts Altair’s SimLab to Automate Meshing of Powertrain Models with Dramatic Time Savings

Dana Holding Corporation is a world
leader in driveline, sealing, and thermalmanagement
technologies that improve
fuel efficiency, reduce emissions and
lower the cost of ownership in passenger,
commercial and off-highway vehicles.
Dana's 25,000 employees operate in
27 countries within a netwo

Customer Stories

HyperWorks, especially OptiStruct is one of the central tools supporting the CAE efforts of BASF Engineering Plastics

Mathematical optimisation methods can provide significant support in virtual CAE part development. In the early phases of the project topology optimisation affords valuable clues to the design of the geometry of the part.

Customer Stories

Dante Sanchez Discusses the Optimization of Mabe's White Goods Packaging

For white goods manufacturer Mabe, the quality of the design and engineering of their home appliances is paramount. The objectives of this project were to simulate the effect of the distribution environment events to a washer and dryer product and...

Customer Testimonials, Videos

XOX Audio Tools

XOX Audio Tools utilizes high design and advanced technologies to create cutting-edge musical instruments.

Customer Stories

Bros Manifatture

Bros Manifatture is a "superbrand" in the world of fashion jewelry and watches with over 200 new products each year.

Customer Stories

Weizmann Institute Case Study: Switching to PBS Professional for HP Clusters

The Weizmann Institute replaced Moab with PBS Professional to manage a 3,096-core HP cluster shared among hundreds of users. The transition process was easy, thanks to Altair’s excellent customer services and support. Now, the Institute enjoys hig...

Customer Stories

PBS Professional at The Scripps Research Institute

The campus of The Scripps Research Institute (TSRI) overlooks the Pacific near San Diego. Its proximity to the famed (but unrelated) Scripps Oceanographic Institute occasionally causes confusion of identities. But TSRI is prestigious in a totally ...

Customer Stories

[AB]structures Relies on HyperWorks in Developing Three Record Breaking Round the World Racing Yachts

[AB]structures, an Italian structural design and engineering company, used the CAE suite HyperWorks first for the Volvo Ocean Race in 2006 to design the yacht for the ABN AMRO White team and has used it since then successfully for several other Volvo Ocean Race and America’s Cup yachts.


This ye

Customer Stories

AcuSolve Validation - NACA0012 Airfoil

This benchmark validates AcuSolve for external aerodynamic applications. NACA0012 has been studied in depth both numerically and experimentally. AcuSolve results are compared with other CFD software results and with available test data

Customer Stories

NASA

A Safer Landing with Water Impact Analysis

Using Altair’s own HyperWorks virtual simulation suite, Altair ProductDesign built an accurate finite element model of the module from CAD data supplied by NASA, as well as a section of water and air which matched the conditions from the l

Customer Stories

Lighter Helicopter Design

During the lifetime of a helicopter, every superfluous pound of weight costs the owner thousands
of Euros. These costs arise due to the additional fuel needed to move the extra mass thus limiting
the amount of cargo the helicopter can transport. To build lighter helicopters, Eurocopter, Europe’s

Customer Stories

Forklift Manufacturer Cuts Pre-Processing Time in Half and Solves Stubborn Design Problems with Altair’s HyperWorks Suite

The main goal of NMHG and Chief Engineer Dr. Pedro Bastias was to virtually design, test and evaluate each product before any physical prototypes are made. Using HyperWorks, NMHG is saving time, cutting costs and identifying new ways to resolve s...

Customer Stories

HyperWorks at B/E Aerospace: Lighter, Safer Seats for Airline Passengers

When you settle in for a flight on a major airline, you are probably in a seat and surrounded
by equipment designed and built by B/E Aerospace. With design and manufacturing facilities
across the globe, B/E Aerospace is the leading manufacturer of cabin interior products
for commercial and privat

Customer Stories

Where Is Your Performance Data?

A new data management system lets engineers easily manage, share and leverage simulation and test data.

Customer Stories

PBS Professional at Toulouse Genopole

The Toulouse Midi-Pyrénées Genopole, a research program set up in 1999 in southern France by the French Minister of Research, is part of the massive French research initiative known as the National Genopole Network. The genopole name is metaphoric...

Customer Stories

PBS Professional at TRW Automotive: A Standard Solution for European Design Centers

As a global technology company, TRW Automotive touches most of us in ways we're unaware of. And when we drive, it is practically a certainty that a TRW system with brakes, airbags, seat belts, or steering is part of the experience. A Tier One auto...

Customer Stories
375 Results

Be the first to know

Subscribe to our newsletter to learn about product training, news, events, and more!