Resource Library

MDGo

Statistics on fatal vehicle accidents show that victims most often do not die during or right after a crash, but in the hours and days afterwards, with research indicating that up to 44 percent of people who died in car crashes could possibly have been saved if first responders and hospitals had
re

Customer Stories

Top Use Case Lambda

Optical and Illumination Design Software by Lambda Research Corporation

Customer Stories

Gulplug

French startup Gulplug, located in Grenoble, France, has set out to revolutionize plug and charging technology used in today's electric and hybrid vehicles. To create new products and to drive innovation in the market, Gulplug is using Altair Flux...

Customer Stories, Customer Testimonials

Roth McFarlane Hand and Upper Limb Centre

See how McFarlane Hand and Upper Limb Centre in London, Ontario is uses Altair SimSolid™ to evaluate the biomechanics of bone stresses.

Customer Stories

Altair Inspire Form Helps Pragati Engineering Address Sheet Metal Formability and Inconsistent Thinning Issues While Reducing Physical Try-out Time by 50%

Pragati Engineering, established in 2004, is one of the leading press tool design and manufacturing companies in India. The company has a national reach and successfully carries out projects riding on the robust shoulders of qualified and dynamic ...

Customer Stories

Schneider Electric uses Flux to Design IoT Actuators

Schneider Electric is a world leader in electrical distribution equipment. Remy Orban, Mechatronic Engineer at Schneider Electric discusses a low voltage circuit breaker actuator design using Flux

Customer Testimonials, Videos

Addressing Design Development Challenges Through Simulation Driven Platform

Automotive suppliers are facing many challenges in having in-house simulation capabilities compared to that of OEM’s. One of the ways to overcome these challenges is to invest in simulation technologies that require an affordable initial investmen...

Customer Stories

More Efficient and Economic Injection Mold Tools thanks to Topology Optimization, CFD Simulation and 3D Printing

Toolmaking is usually characterized by cost-intensive, custom made, single-unit production. To create innovative tools, the industry increasingly relies on new manufacturing methods such as 3D printing. To meet market demand, PROTIQ GmbH, a spinof...

Customer Stories

Developing an Injury Threshold for Human Brain Concussion

Directed by Dr. King Yang, Professor of Bioengineering, the Department’s Bioengineering Center is a leading laboratory focused on research into impact trauma, low back pain, and sports injury biomechanics. For the development of complete understa...

Customer Stories

ICAT Achieves Robust Structural Integrity of their Automotive Components using Altair HyperWorks®

The International Centre for Automotive Technology (ICAT) is an automotive testing and R&D centre. In their pursuit to carve a niche as a one-stop solution for the automotive industry’s needs in the areas of product design, testing and validation,...

Customer Stories

Faraone

Faraone accelerates the design approach for lighter and stiffer architectural components with premium topology optimization technology.

Customer Stories

Lighter, farther, faster, greener: TUfast Eco team drives to success with HyperWorks

For the Shell Eco-marathon, an international contest for sustainable mobility, student teams from schools and universities all over the world design vehicles that are as energy-efficient as possible. After passing a technical check, the vehicles c...

Customer Stories

Triton Bikes

Triton Bikes utilized Altair Inspire to Increase performance, decrease the overall weight, and simplify manufacturability of a 3D printed custom bike rear yoke.

Customer Stories

APWorks Choses OptiStruct for Topology Optimisation for the 3D Printed Light Rider

Despite its skeletal appearance, the Light Rider is an extremely strong yet lightweight electric motorcycle designed by Airbus subsidiary APWorks as a showcase of what’s possible when OptiStruct's topology optimisation is coupled with metallic 3D printing.


Written by Tanya Weaver from DEVELOP3

Articles, Customer Stories

Bremar Automotion uses Altair RADIOSS to Design & Certify FIA Motorsport Roll Cages

“The Altair product is it for us in terms of simulation. That’s all we use. It’s great to be able to show such good correlation between the simulations and physical testing, and to have confidence in not only our approach, but also the Altair prod...

Customer Stories

Sharma & Associates

Sharma & Associates (SA), a Chicago-based consulting firm that is focused on providing engineering solutions to the railroad industry, led the effort. Since 1995, SA have delivered safe, effective and efficient solutions to its customers, which in...

Customer Stories

Applications of Acusolve and Optistruct in the High-Temperature Reformation of Biomass

Applications of Acusolve and Optistruct in the High-Temperature Reformation of Biomass presentation given by Tim Laska of sundrop fuels at ATCx Energy.

Customer Stories

Inspire for the Oil & Gas Industry

Inspire for the Oil & Gas Industry presentation given by Blaise Cole at ATCx Energy.

Customer Stories

Increasing Robustness and Reliability of a Race Car Engine with AcuSolve

This study is part of Prodrive’s implementation of AcuSolve to enhance its CFD capability after many years of outsourcing these simulations.

Customer Stories

Computational Analysis of Quadriceps Tendon Force Following Total Knee Replacement Surgery Leads to Improved Patient Knee Flexure

Anterior knee pain is a significant complication following total knee arthroplasty (TKA) surgery. The inability to freely extend/flex the knee has a crucial influence on patients daily activities including walking, lifting and rising from a chair....

Customer Stories

Tesla Optimizes CAE - Desktop Engineering Reprint

Automating CAE connectors creation in HyperMesh and utilizing HyperStudy for pedestrian impact simulation helped optimize Tesla’s design cycle and get better crash and safety performance.

Customer Stories

CAE Technology Applicable to the Aerospace Industry - JEC Reprint

In this article, published on the May 2014 issue of JEC Composites Magazine, Shan Nageswaran explains why the latest version of HyperWorks® represents the most advanced evolution of computer-aided engineering (CAE) technology applicable to the aer...

Customer Stories

Reducing Weld Distortion by 93% with HyperStudy

Gestamp Tallent Ltd is a world class designer, developer and manufacturer of cutting edge, chassis structural and suspension products, body in white structures, modules and systems for the automotive industry. Gestamp used the BMW MINI front subfr...

Customer Stories

Scania Customer Story

Squeak and rattle phenomena are studied in the automotive industry in an attempt to reduce the cabin noise and as a result, give a better ride quality and comfort to occupants. In the case of Scania’s Cabin Development Department, this kind of sim...

Customer Stories, Videos

Northwestern University Success Story

Using HyperWorks for Teaching Computational Optimization Methods in Engineering Design at Northwestern University

Customer Stories

Toyota Motorsport GmbH uses Altair‘s SAO System to better control software costs in its commercial Software tools

License monitoring delivering information about the actual scope of software usage with Altair’s SAO solution, improving decisions on software renewal and acquisition.

Customer Stories

PBS Professional Wins at NCI Raijin, Largest Supercomputer in Southern Hemisphere

Australia’s National Computational Infrastructure (NCI) chose PBS Professional to manage workload for its ‘Raijin’ cluster from Fujitsu, the largest supercomputing system in Australia with over 1000 users.

Customer Stories

PBS Pro at Czech National Supercomputing Center

The IT4I National Supercomputing Center uses PBS Professional to manage its new Bull cluster being shared by over 200 planned users. Center officials say PBS “provides the robust commercial functionality we need in a scheduler”

Customer Stories

Polaris Reduces Weight of Snowmobile Structures Up to 40% with solidThinking Inspire and OptiStruct

Polaris, based in Roseau, Minn., is a
renowned manufacturer of snowmobiles,
and its Snowmobile Chassis Structures
Group is engaged in design and testing that supports three different platform teams with chassis solutions for each set of requirements. Computer-based design and finite element (FE)

Customer Stories

Evenflo

Evenflo employs topology optimization and generative design simulation for “sustaining engineering” where fast turnaround is essential for functional improvements of  infant car seats design.

Customer Stories

XOX Audio Tools

XOX Audio Tools utilizes high design and advanced technologies to create cutting-edge musical instruments.

Customer Stories

TokyoFlash Japan

TokyoFlash is a world leader in the design and sales of unique watches. They use Altair Evolve to speed product development.

Customer Stories

AcuSolve Validation - NACA0012 Airfoil

This benchmark validates AcuSolve for external aerodynamic applications. NACA0012 has been studied in depth both numerically and experimentally. AcuSolve results are compared with other CFD software results and with available test data

Customer Stories

Unilever

Optimizing Packaging Designs & Reducing Prototype Costs

To remain at the forefront of innovation within the male grooming market, Unilever, constantly looks for ways to differentiate their products from competitor offerings. For the Lynx (Axe) brand, Unilever needed to adopt a simu

Customer Stories

HyperWorks Accelerates Design Process and Development of Diesel Export Locomotive at RDSO

Altair HyperWorks helped RDSO reduce development time and optimize structural characteristics of the diesel export locomotive. Physical testing on these large, complex structures had to be limited. Using HyperMesh/HyperView pre/post processing cap...

Customer Stories

SmartCore optimizes fleet management at Boyaca

Boyacá has been handling the daily delivery of newspapers and magazines in Spain for more than 35 years. Fulfillment of time schedules is essential for customer satisfaction and late deliveries can result in additional costs. Boyacá needed to have...

Customer Stories

Application of HyperWorks in the Subsea Oil and Gas Industry

The volatile nature of deep sea installations presents a difficult challenge for engineers
to create products which can withstand extremely high pressures in a variety of weather
conditions. Duco selected HyperWorks to model subsea umbilicals, resulting in improvements
to their analysis productiv

Customer Stories

Quality Driven by CAE

Advanced CAE tools enable companies to design quality into their products.

Customer Stories

Dialing into Simulation to Streamline Cellular Phone Development

Upstream model simulation reduces product development time and enables Motorola to meet critical market demands.

Customer Stories

HyperWorks at Sea Ray: Engineering High-Performance Pleasure Boats

For Sea Ray Boats, the leading, U.S.-based manufacturer of high-end pleasure boats, CAE simulations
are an integral part of the design process to achieve shorter time to market. HyperWorks is deployed
for the entire analysis process of the vessel, from modeling and simulation, to visualization and

Customer Stories
375 Results

Be the first to know

Subscribe to our newsletter to learn about product training, news, events, and more!